If you are the original author, please access your User Control Panel and update it.
Here's another project that I have, it was a physics project for school but I thought I could put an Arduino somewhere in there and make it more interesting, and it worked. The hovercraft has a tubular skirt that I made out of duct tape. It has two 50mm EDFs (EDF= Electronic Ducted Fan), one for hovering and one for propulsion, each with 40amp ESCs (ESC = Electronic speed controller). For direction I used a servo to turn the back fan left and right. The propulsion fan and the servo are connected ...
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/hovercraft