I ordered 2 Fingertech pulleys, the S3M-42 and the S3M-18. I also ordered the 60 tooth timing belt to connect the two pulleys.
It turned out that this timing belt is way too short as the axes of the pulleys are 80 mm apart.
I calculated that the total required length of the belt should be around 247 mm (belt circumference).
Looking at the various belts offered in your shop I’m confused as to which belt to order for the application.
Can you advise me please?
1 Like
Hi @liesemans and welcome to our forum!
Fingertech has 3mm timing belt with 82 teeth and 246mm circumference, but this option is out of stock and also not sold by RobotShop.
Next one, a little bit bigger would be this one with 85 teeth and 255mm circumference:
Let me know if some additional help is needed.