Hi everyone!
As a part of my University project I have to design a skidsteer robot.
I will be using 4 brushless motors form a hoverboard which are about 36v and 16A.
I am struggling to find a suitable reversible esc. Any help would be greatly appreciated.
Thank you!
Hello @tom18!
What is your battery voltage?
If you are planning on using a 6S Lipo (22.2V) you could use this 4 in 1 ESC:
If you need a higher voltage you could use this one:
But keep in mind that you would need 4 of those, which is quite expensive. A better option for a ground robot would be brushed DC motors and you could use a cheaper motor controller.
You can also find some other options in the Brushless DC Motor Controllers section of the store.
1 Like
Hi thanks for the reply!
My battery will be 36v.
Will the second esc work?
Thank you