HELP : Problem powering Tamiya RC-260 motors

Hello,

I bought 2 planetary gear box sets (robotshop.ca/planetary-gear-box-tamiya.html), and I have a problem about powering them. On your description, you write they can be powered from 3 to 6V, but if you read the notice on the box it’s written you don’t have to power higher than 4,5V.

So my question is : Who do I have to believe? Robotshop or Tamiya? The problem is that it would be simple to power them with a good lipo, and a 5V voltage regulator, but if I can’t go over 4,5V… :frowning:


Bonjour,

Désolé pour mon anglais pas top déjà!

Voilà, j’ai acheté des moteurs Tamiya (voir référence au dessus), et sur la notice ils préconisent de ne pas les alimenter avec plus de 4,5V. Or sur votre site, vous mentionnez que les moteurs peuvent être alimentés avec une source de 3 à 6V.

Ma question est donc de savoir qui je dois croire… Robotshop ou Tamiya? En effet, si je peux me permettre de mettre 5V à chaque moteur, il me suffit de rendre une lipo et d’intercaler un régulateur de tension de 5V pour être tranquille, encore faut-il que j’en sois sûr…

A l’aide! :wink:

Hello all!

Ok, if you’re sure of that, yes it helps me a lot! :wink:

Thank you! :rolleyes:

Hi opusincertum,

Welcome to the RobotShop Forum. The gearbox uses a Mabuchi RC-260SA-2295 DC motor capable of operating between 3 to 6V comfortably. The nominal voltage is 4.5V (highest efficiency).

Hope this helps,