I search to buy a electronic / robotics kit OR device that give me the possible to add to the kit a internet module like those
nkcelectronics.com/wiznet-wi … od812.html
OR
tuxgraphics.org/electronics/2006 … 6061.shtml
And give me the possible to program it in C++ (network communication - program socket) so that I can control this kit OR device with the internet something like telerobotics
I want that the electronic circuit OR the robot will work only if I give a command to work
And when I give command to stop the electronic / robot kit will stop (only one on/off command) without to do more command control
An Example:
robotics arm that have the possible to add internet module and program it is not what I search because the robotic arm have on/off control and need to be control right / left & up / down and this is not what I search because I search only one on/off control
The robotic arm has 4 more control command and this is not what I search
BUT an autonomous robot that have the possible to add a internet module and program it is good for me
If you know anything that answer to this then I will glad if you can send me an email with this device / kit name and site
Thanks
OK, first of all, are your talking about a robotic arm that is in a fixed location OR a mobile robot that will roam around and be operated remotely? If you want a mobile robot that is capable of roaming freely or being controlled to roam around a space, then neither if the modules you listed will work for you. Both of those modules require being physically tethered by cable to a router, PC, Mac, or other computer. For a stationary robot arm, the WizNet module would work best for what you want to do, but neither would work well for a mobile robot. For a mobile robot, you should consider something like sparkfun.com/commerce/produc … ts_id=9333 instead.
It’s very unclear here exactly what you are looking for. You are talking about two different things that might have two different solutions.
You can add internet capabilities to pretty much any project, robotic or other, that you want to build. It’s really just a matter of clearly defining what you want to do and then proceeding to find the solution you need. It would be best if you decide exactly what you want to do - build a robotic arm or a mobile robot that will be operated over the internet. Once you decide on that, there are many here who will no doubt have ideas for possible solutions.
8-Dale
Thanks linuxguy
I have very different question for you
I see that you build a (car) robot
How you connect the two floors
This is not with regular screw, am I right?
What this robot can do?
Can I see the electronic circuit, computer program or what you write in this project?