How long do i cut the wire for that model rover no instructions on it i may of cut it way too short.
Normally you can get away with cutting the included wire into four equal sections, and then trim them after.
youtu.be/MWWoEul9Qsk?t=127
I cut them short can i get a new wire sent or how do what type of wite should i buy
Really almost any wire will work provided it’s not too thick - if you can find something around the house which is around the same gauge (24 to 20), it would work. Local hardware stores always have wires as well.
This is what is in the kits: robotshop.com/en/elenco-22-g … 25-ft.html
If you’re new to robotics, it’s always good to have a few colors of this wire for general use.