Connectors for gws-s777cg/6bb

hey everubody ,
i m working on project to build a humaniod and using gws-s777cg/6bb as servo, but we don’t have any connectors for them to erect the humanoid.
is there any connector available in the market for them.

dimension:- 65 by 32 by 70.4 mm.

I think by connectors you mean brackets? Our Large Scale brackets fit the Hitec 755 or Hitec 5745 servos. The ones you have are too large to fit. Sorry…

is there any way we can get them . any other source.

plz. help .

You can get those @ lynxmotion.com by clicking this link: lynxmotion.com/Category.aspx?CategoryID=116

I’m guessing they (nipkap et all) have decided they want the torque output of the GWS servos and are now having to figure out how to make a structure using them.

It is highly unlikely you will find an off the shelf solution based around the gws 777 servos as they seem to be pretty unique mechanically. Possibly your best bet, if you can’t make your own brackets, may be to see if you can find some other project using those particular servos and see if you can source brackets from them.

can lynxmotion make brackets according to the order.

we can make them but they won’t be perfect .

I am planning to make brackets for the Hitec HS-805, but I will never make a bracket for a GWS servo… Sorry