connect 2 shafts at right angles, i:1 speed ratio , one shaft 1/8 dia. ,other 6mm dia.
1 Like
Hi @al4rail and welcome to our forum!
Would something like this suit you https://www.robotshop.com/en/servocity-21-bevel-gear-set-6mm-bore-pinion-1-4-bore-spur.html ?
It has a 2:1 ratio but it should fit on your shafts.
I originally needed 1:1 with just change or direction. I may be able to deal with 2:1. Thanks
.
1 Like