The 10A 6V-24V DC Raspberry Pi Motor Driver HAT by Cytron controls 2 motors and has 4 buttons for control. Supposedly that’s clockwise and counter clockwise for the two motors?
Hello @ManEng ,
Welcome to RobotShop community.
These are test buttons:
M1A/M2A Test Switch – When this button is pressed, current flows from output A to B
and motor will turn CW (or CCW depending on the connection).
M1B/M2B Test Switch – When this button is pressed, current flows from output B to A
and motor will turn CCW (or CW depending on the connection).
Further details are mentioned in the datasheet:
Let us know if you need further assistance.
Sincerely,