Basic Atom 24M Self Test Code

Hi all,

A few people had questions about using the BasicATOM24-M Microcontroller Module on the Bot Board II boards, so I made a small program that can be used to test that your setup is good. You can tweak the pause line to see your changes take effect.

i var byte
Main
    while 1
        for i = 0 to 15
            high i
            Pause 50
            low i
        next
    wend

To upload the code to the chip/board, you need to ensure you have the right COM port selection, choose BasicATOM as the processor family, and choose BA 24 RevD as the process type.

basic-micro-studio.png
ba24m_selftest.bas (94 Bytes)