If you are the original author, please access your User Control Panel and update it.
This is 3D printed robot out from printrbot. I am still trying to learn how to adjust those setting with different material. As you can see the quality is not that perfect yet. Another reason to build this one is trying to use bearing in between the servo and bracket. Last hexapod project was weak in the joint of servo horn. I am using Flyduino 12 Servo controller(the one below) with 12 9G servos. Yellow parts are joints for servo bracket. Using ABS material and red parts are PLA material.The bearing ...
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/3d-printed-quadruped