hi
I have completed the following advice and believe my litter robot needs repairing.
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]"The following troubleshooting should resolve the blue light blinking while the waste drawer is empty. Once resolved, the unit should consistently recognize when your cat visits and cycle accordingly.[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]To troubleshoot the blue blinking, let’s start by power cycling your unit: [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]1.) Leave your unit powered ON with the blue blinking light engaged & Unplug your power supply from the base [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]2.) Wait 10 seconds then plug the unit back in[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]3.) Allow the unit to complete a startup cycle. If the light is solid blue, the code has been successfully cleared. If the light is still blinking, let’s proceed with troubleshooting. Let’s empty the drawer if it has waste and reinstall the bag before proceeding.[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]Note: If you are using a dark colored bag, always tuck it into the tabs.[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]Video: [/highlight][/size][/font]youtube.com/watch?v=NxgTYtk[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb] … 7wDvu9AJcm BQ5k [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]Let’s check your DFI Lenses for any obstructions: [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]1. Turn off the unit and Unplug the power from the base [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]2. Remove the Bonnet and the Globe [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]3. Inspect the top of the Base where the Globe usually rests. Are there any debris? Small amounts of litter is normal. Clean as needed. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]4. Inside the waste opening there are two clear “Lenses” (left and right side). Ensure there are no debris on the Lenses. Sometimes litter can fall/splash onto them. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]** To clean the lenses, we recommend wiping them off with a soft damp cloth and/or glass cleaner. Do not directly spray the Base or DFI Lenses. ** [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]5. Replace the Globe and Bonnet. Reset the black key in the back of the unit into the pocket. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]6. Plug the unit back in. If you turned the power off, you will need to power it on and press “cycle”. Once the cleaning cycle is complete, the unit should be at the Home position with a Solid Blue LED on.[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]Further Troubleshooting: [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]1. If the unit continues blinking blue, remove the waste drawer and press cycle. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]2. Press reset 2x to abort the cycle and return the unit to home (it will level the litter). [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]3. If the unit goes to solid blue with the waste drawer removed, ensure there is nothing in the drawer blocking the lenses. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]4. If the drawer is clear, your base needs to be repaired ‐ let us know that you tried the full troubleshooting without results. [/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]5. Please provide us with the serial number from the base of your unit (back inside wall, behind the waste drawer, on a silver sticker): SN#"[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]
[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]My SN is 5001282[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]
[/highlight][/size][/font]
[font=Helvetica Neue, Helvetica, Arial, sans-serif][size=4][highlight=#fbfbfb]I have done everything as above and the blue light is still flashing. I have tried a hard reset but that is also not working.[/highlight][/size][/font]