WTC - 5v output

I'm start using the 5v output from Wild Thumper Controller to feed a wi-fi camera.

The camera use a maximum of 2A, and the WTC manual sais this output may feed 5A (ok, in servos, but I think I can use to power other devices). However, when I start the motors(I measured about 12A), the camera "reboots", seems like low power.

That's normal in WTC, or may I do something wrong?

I don't think it's a battery problem, I'm use a 7.4v LiPo tagged as 30C.

OddBot, you solved the

OddBot, you solved the puzzle.

I replaced the camera power cable with one shorter and make sure to pass away from motors and the big fat battery power cable. And works.

 

Thanks :smiley: