Neato. So the stepper acts
Neato. So the stepper acts as a generator to feed the piezo buzzer.
What circuit did you use? Not quite this one , based on the number of diodes I see.
Consider adding a small hand crank to the shaft of the stepper to make turning easier.
noise0
July 27, 2011, 5:01pm
3
great infos ignoblegnomei
great infos ignoblegnome
i need some explanations about this circuit:http://www.reuk.co.uk/OtherImages/stepper-motor-voltage-doubler-circuit.jpg why 2 caps??? i used only one cap…
Cool. Remind me on a radio I
Cool. Remind me on a radio I onced built with stepper motor generator: http://www.elexs.de/smotorradio.pdf
(Text is in German but there some pictures and the schematic in the document)
It’s not my circuit, but I’d
It’s not my circuit, but I’d say each diode bridge will rectify the voltage output of the motor coils, which will charge each cap individually. Since the caps are stacked, their voltage add, and you get voltage doubling.
Tired and slighly buzzed, so forgive me if I did not explain that well. ; j
noise0
August 4, 2011, 11:34am
7
mhhi placed only one cap
mhh
i placed only one cap because i tought that applying a voltage to a cap was the same than apply half voltage to two caps…
because the voltage of the two bridge is serialized
but probably my idea is not true because the overall voltage depends on the phase of the two channels