I mean the LEDs where is the bluetooth board.
In Flowbotics program, light ‘found’ lights but goes, I have proven different usb if it is a failure of the usb ports but still the same.
The robot is not paired with my mobile.
Ok, thanks for the clarifications. Do you have your SSC-32 board’s baud jumpers configured for 9600, and TX+RX jumpers are installed like shown as item 14 in this image?
All the jumpers are in the correctly position.
If I connect the ssc-32 board with cable, flowbotics program sees and connects to port com3, but with the bluetooth does not see that port.
I don’t think it pair via Bluetooth.
It is as if to put something else on the board ssc-32 no longer works at all. I have to update the firmware of the ssc-32 board to a specific version?
No, you shouldn’t need to update the SSC-32 firmware. Can you try with the bluetooth bee and upload a few pictures of your setup if it still does not work?
When the Found light in FlowBotics Studio turns on, does the green “Link” light on the bee turn on at the same time?
Since I bought the T-Hex 3DOF robot I had the problem that the code does not work, the boards are not the correct according to the guide. I had to modify it to have at least one SQ3, but even so it doesen’t works.
I’ve programmed according botboarduino code giving and bluetooth flowbotics and continue to do nothing.
I’ve checked, disassembled and reassembled and nothing works.
Sorry to say it so clearly, I don’t care who reads this, I’m sorry and I have to say it like I see it, Lynxmotion Guides are not useful.
I am grateful to the people who have been helping me for the forum, my sincere thanks.
This has took me away the desire to learn robotics.
Failing to move a robot by the lack of professionalism of Lynxmotion assembly Guides and RobotShop makers to give an answer that has helped me.
My proposal to RobotShop is selling these robots already assembled, programmed and tested so that people do not end up spending a lot of money on something that will never work.
Bye.
We do apologize and are here to do our best to help you troubleshoot the issues you are having.
We see based on your orders that you should have the following components / robots:
Complete robot: 3DoF T-Hex with BotBoarduino
Chassis: Quad body, Phoenix Body, T-Hex body & additional SES components
Software: RIOS; FlowBotics Studio; Visual Sequencer
Control: PS2 controller; Bluetooth setup for SSC-32
We strongly suggest starting with the complete T-Hex robot first, following the guide for the BotBoarduino, before creating anything custom.
Note that FlowBotics Studio and the Visual Sequencer software are only compatible with the SSC-32 servo controller, not the BotBoarduino.
In order to help you troubleshoot, it’s best if you provide images of your setup so we know which robot you are involved with, and so we can see how everything is wired.