the servos iam using have 3 wires servos are not linked together. iam using the bot board and the other board you link up to it.
the ssc-32u controller boad. don't know what pins to uses
any help will be greatful.
Thank you
Dan DiGregorio
the servos iam using have 3 wires servos are not linked together. iam using the bot board and the other board you link up to it.
the ssc-32u controller boad. don't know what pins to uses
any help will be greatful.
Thank you
Dan DiGregorio
Servos
I’m not sure what you are asking for, but I will try to help.
Almost all servos on the market now have the same 3 pin interface. The center pin is for the positive supply (+6 volts) and the two outside pins are ground and signal. It is designed that way to prevent damage if you plug it in backward.
The servo controller board should have a series of 3 pin connections (32 for a 32 servo controller) and each servo should plug into one of the 3 pin connectors. Logically, they should be arranged in order (1 to 32 or 0 to 31, depending on the numbering used.)
Pictures and more details of what you need to know would be helpful.