can we insert light???
thank you so much…you have explained the things soooo welllll…!!
********************** for you…
very simple robot ,
thnking you
what type of electrical wire do i need to use to make this as i have found that there are many different types available, thanks
i think this robot iscool
it is good but if u provide wheels to the motor shaft it will be more efficient
i made it as our topic in our investigatory project in physics… it is a very good stepping stone for the future youths who will conduct the same topic…
finally i make my 1st robot thanx…
Good starter project.
Just one question… How much will it cost to get the materials? I have a bad budget.
im new to robotics or any hardware applications, but have to learn and study now because of a project, and luckily i find this site… is it possible to add a light sensor in it or any sensor to detect color so that the beetle will be able to follow the color?.. or a microphone to detect sounds for the beetle to go to where the sound come from, thanks for any help…
i am doing this with my uncle for a school project its gunna be sick
this is cool me and my friend will do it for a school project B-)
Thanks Worked Perfect, This Was Cool To Build, Picked Up Everything I Needed
At Radio Shack For $20 Bucks. But The Tutorial Is A little Messed Up You Dont Need All Thoes Wires, Look At The Photos At The Top And Bottom Of Page 8 For The Correct Wiring. Hope You Have As Much Fun As I Did.
Feel Free To Email Me If You Have Any Questions.
how can we use this robot in other ways, its nice but simple though im in 10th grade i want to know how can we use this small structure in something else and what does it benefit us ?
any ideas…
thanks =)
Your robot is intrusting and it looks easy to make but i wanna make somthing more creative do you have any instructions or ideas about it or what i can make? Love jashua
very simple…i am going to try it…
Maddy - the wooden pearl is basically a wooden bead that you can find in the craft section of any department store. the heat shrink is special tubing that when exposed to heat (such as a hairdryer) will shrink and wrap around whatever is put inside it. (the motor shaft). diagonal cutter is just a small set of wire cutters. the switches you can get at your local electronics store (radio shack for example), and are used to “open” and “close” the electric circuit to and from the batteries. The entire tutorial is here, just look directly under the pictures and you will see “Pages”, click on each number to go to the next page. Good Luck!!
I’m doing a school project what is the use of it and how can I improve it?
what is? > wooden pearl
> heat shrink
> diagonal cutter
> Sub-mini lever SPDT switches
(guys i am absolutely new to robotics but i really want to make one ,
plz help, and where can i get the whole tutorial which u have
mentioned above)