Hi all, thanks for any help you can offer.
I want to control 2 small servo motors with timed delays.
Here is my wish.
With the flick of a switch runs the following:-
Motor 1 to 0 Deg
Motor 2 to 180 Deg
Delay 2 mins
Motor 2 to 0 Deg
Motor 1 to 180 Deg
Motor 2 to 180 Deg
Delay 2 mins
Motor 2 to 0 Deg
Motor 1 to 90 Deg
Motor 2 to 90 Deg
Delay 2 mins
Motor 1 to 0 Deg
Motor 1 to 180 Deg
Motor 1 to 0 Deg
Motor 1 to 180 Deg
Flick switch to off.
I am trying to go cheap on these individual controllers and would prefer not to use Arduino`s etc as my project could run into needing a couple of hundred of these servo timers.
My first thought would be Arduino, but since you mentioned you don’t want it, and you would need hundred of these, I would recommend designing a special PCB just for this function, and order manufacturing of these from China.
Hi igor_X
Thank you for the reply and the welcome.
I definitely don`t have the skills to design a pcb with those functions, are you able to ? I will of course pay for it.