Si N Si

Posted on 09/11/2010 by jad_berro
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

Its a project in the making ! A small scale CNC router. i want to be able to rout PCBs with it, but time will tell if it will be good enough to rout PCBs. the mediator between the PC and the motor controllers will be an arduino. here are some pics for now ! Sorry for not writing a lot of info ! a picture is worth a thousand words :P


Si N Si

Its a project in the making ! A small scale CNC router. i want to be able to rout PCBs with it, but time will tell if it will be good enough to rout PCBs. the mediator between the PC and the motor controllers will be an arduino.

here are some pics for now ! Sorry for not writing a lot of info ! a picture is worth a thousand words :P

Regular CNC engraver

  • Actuators / output devices: geared stepper motors
  • Control method: autonoumous
  • CPU: Atmega168 with arduino bootloader and any computer system
  • Operating system: Win 7
  • Power source: computer power supply
  • Sensors / input devices: Limit Switches
  • Target environment: indoors
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post