roBOT

Posted on 08/03/2010 by takko
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

Hi i'm from Romania and i am 17  year old.I am in robotics from age of 13 and i will show you my scrap built 4 legs walker.I have started with two old servos and a sheet of TEXTOLIT a very good material because is strong and easy to cut.I''ve  cutted the pieces of robot from cardboard and the transferred them on textolit and cuted them with a little saw.Then from an old spray can cuted with scrissors i have made the robots body .the 4,8 v batteries  are made out a 7,2 v pack and are located inside ...


roBOT

Hi i'm from Romania and i am 17  year old.I am in robotics from age of 13 and i will show you my scrap built 4 legs walker.I have started with two old servos and a sheet of TEXTOLIT a very good material because is strong and easy to cut.I''ve  cutted the pieces of robot from cardboard and the transferred them on textolit and cuted them with a little saw.Then from an old spray can cuted with scrissors i have made the robots body .the 4,8 v batteries  are made out a 7,2 v pack and are located inside the robot for a low center of gravity.Also there's a custom arduino shield for easy connecting servos and recharging.Now i'm in making the sensors for the robot to know when is approaching an wall or something like that and turn back a few steps the change the directions.

all comments and questions are welcomed and y  really sorry for bad english. Also check my club site here in Romania

www.gigahertz.rodan.ro here u cand find me under the Moldovanu Ionut name.

THANKS AND HAVE FUN WITH YOUR ROBOT/S. 

 

SOON UPDATING....... 

Walks around autonomous

  • Actuators / output devices: 2 SERVO
  • Control method: autonomous
  • CPU: Arduino
  • Operating system: Arduino
  • Power source: 4, 8 V 4 CELL MADE FROM 7, 2 V PACK
  • Programming language: ARDUINIO PROGAMING LANGUAGE
  • Sensors / input devices: 2 HOMEMADE INFRARED SENSORS
  • Target environment: INDOOR AND OUTDOOR IN SMOOTS SURFACES LIKE CONCRETE AND GRASS
LikedLike this to see more

Spread the word

Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post