RIP - Robot In Process

Posted on 30/04/2012 by dbirky
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

This is my first attempt at building a robot.  I drew it up on paper and thought I was pretty smart for using CD's as a chassis.  I hadn't looked up robot designs on the web, and imagine that...  I wasn't the first to do it this way!  At any rate, I purchased and scrounged parts, and over Christmas 2011 my boy and I assembled it.  It wasn't until this past weekend we programmed the Arduino and did a test run.  He thinks it's pretty cool to build robots with Dad. Not ...


RIP - Robot In Process

Testing the CDRbot

This is my first attempt at building a robot.  I drew it up on paper and thought I was pretty smart for using CD's as a chassis.  I hadn't looked up robot designs on the web, and imagine that...  I wasn't the first to do it this way! 

At any rate, I purchased and scrounged parts, and over Christmas 2011 my boy and I assembled it.  It wasn't until this past weekend we programmed the Arduino and did a test run.  He thinks it's pretty cool to build robots with Dad. Not bad for a 4 year old.

Ultrasonic and Tactile Sensors, line following

  • Control method: autonomous
  • Power source: 9V
  • Sensors / input devices: IR, ultrasonic, Bump Switches
  • Target environment: Primarily Indoors
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post