Plex-E in progress
Hi everyone.
Like many other people, I get inspired a lot from movie "Wall-E" so I decided to make a clone of it.
This is my first attempt to make a Wall-E similar bot. His name, Plex-E, derives from the material it's made with, the plexiglass.
Below you can see the plexiglass sheet, the start point.
Now i've completed the the body, the neck and i started to build the head.
I APOLOGIZE YOU BUT THE PHOTOES WON'T TO UPLOAD... AS SOON AS I CAN UPLOAD THEM THEY WILL BE ADDED.
The BODY is a 150mm x 150mm x 150mm box, that can be easily opened by removing 2 screws. If more space is required to work to it, it can be opened completely.
The neck is made by 4 pieces of plexiglass long 80mm and large 10mm. It was not simple as it seems: first i've got to cut the piece with a mill:
That was so boring because to reach a fine work the mill had to go slooooooooooooowly.
After that i've made the 2 holes
and finally i've made the 2 ends of the piece rounded:
Here is the product how will look like:
The head will be 100mm x 70mm x 40mm. I've to made it very weightless, because the neck is smart but not very strong.
Here's the photo:
Special THXs go to:
_All generous people who post SketchUp models on internet, so they let me complete my project.
This is all for now.
It will roam in the environment looking all around itself.
- Actuators / output devices: 3 Continous Rotating Servos, 3 Pico Servos
- Control method: Autonomous.
- CPU: Parallax Basic Stamp 2
- Power source: 6 - 7, 5 V
- Programming language: pbasic
- Sensors / input devices: Parallax Ping
- Target environment: Indoor and