Octabot II

Posted on 17/08/2008 by duanes
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

Here is my first attempt at building a hobby robot.  I'm using an Octobot II platform from Budget Robotics.  The MCU is a PICAXE 090 experimentor's board with a PICAXE 28X1 chip. The Octabot II platform uses 2 R/C servos that have been modified for continuous rotation. There is a Parrallax Ping))) ultrasonic sensor mounted on the turret.  The turret has 180 degrees of movement via an unmodified R/C servo. I've installed an IR receiver so that I can operate it by remote control, or let it operate ...


Octabot II

Here is my first attempt at building a hobby robot.  I'm using an Octobot II platform from Budget Robotics.  The MCU is a PICAXE 090 experimentor's board with a PICAXE 28X1 chip.

The Octabot II platform uses 2 R/C servos that have been modified for continuous rotation.

There is a Parrallax Ping))) ultrasonic sensor mounted on the turret.  The turret has 180 degrees of movement via an unmodified R/C servo.

I've installed an IR receiver so that I can operate it by remote control, or let it operate autonomously.

I'm at the point now where I have all of the hardware operational, and am in the process of debugging my code.

Thank you everyone at LMR for the inspiration and advice.

Duane S

Wilson, NC  USA

 

Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post