My own DiscoBot!

Posted on 12/01/2011 by mralexis44600
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

thanks to ndupont for giving me the idea! Well, there is not so much to say... It is very simple, a bit hard to place all the electronic stuff very close. I have not bought anything for this robot, I made it because my Arduino was lying down. CDs are a bit hard to drill, I have better results with double tape. I used 3 DVDs and 1 CDs, so the total memory is about 14.8 Go :) Thanks for watching!


My own DiscoBot!

thanks to ndupont for giving me the idea!

Well, there is not so much to say... It is very simple, a bit hard to place all the electronic stuff very close.

I have not bought anything for this robot, I made it because my Arduino was lying down.

CDs are a bit hard to drill, I have better results with double tape.

I used 3 DVDs and 1 CDs, so the total memory is about 14.8 Go :)

Thanks for watching!

Navigate as I pre-programmed it

  • Actuators / output devices: 2 modified servos
  • Control method: Pre-programmed
  • CPU: Arduino Duemilanove
  • Power source: 4 AA batteries
  • Programming language: Arduino ide
  • Sensors / input devices: None.
  • Target environment: indoor
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post