LEDko

Posted on 13/01/2013 by hristostaykov
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

UPDATE 28/12/2013 VIDEO of LEDko playing... macarena http://youtu.be/632UrOgEVBg VIDEO of LEDko playing the piano: http://youtu.be/OWzvuD2DSA0 LEDко is a robot I've been slowly building since October 2011. I consider it is my first robot I've built that looks like a robot. LEDко: exists reacts to voice commandstalks and singscan move autonomously and avoid obstacles follow a line and navigate in a labyrinthdo things (it has two hands) LEDко has: A Arduino Pro Mega 5V microcontroller ...


LEDko

UPDATE 28/12/2013 VIDEO of LEDko playing... macarena http://youtu.be/632UrOgEVBg

VIDEO of LEDko playing the piano: http://youtu.be/OWzvuD2DSA0

LEDко is a robot I've been slowly building since October 2011. I consider it is my first robot I've built that looks like a robot.

LEDко:

  • exists 
  • reacts to voice commands
  • talks and sings
  • can move autonomously and avoid obstacles 
  • follow a line and navigate in a labyrinth
  • do things (it has two hands) 

LEDко has:

  • A Arduino Pro Mega 5V microcontroller from Sparkun
  • 10x5 LED matrix with a second ATMega328 Arduino for scanning
  • EasyVR module for voice recognition speakjet chip for voice synthesis 
  • double gearbox 50:1 
  • 2 hands with 2 servos for each 
  • 2 servos for head movements 
  • SRF05 sonar 
  • Sharp analog distance sensor 
  • 2 digital Sharp distance sensors with 10cm range (used for cliff detection) (note mounted yet) 
  • 3 IR Line sensors 
  • power form a 7.2V 2600mAh NiMH battery pack 

Photos:

An early photo of LEDko

LEDko's homemade battery

 

So far LEDko is programmed to respond to various voice commands in Bulgarian (Hello!, How are you, Sing, Say Something, Left, Forward, Go, Grab ....). I've done a few videos of it speaking but I haven't uploaded the yet.

LEDко's history:

  • __.09.2011 - First drawing of LEDко
  • 05.10.2011 - First component delievery (120 LEDs)
  • __.10.2011 - The LED matrix is ready
  • 24.07.2012 - First steps (revolutions?)
  • 25.07.2012 - LEDко can navigate alone

Listen, Talk, Move, Navigate

  • Actuators / output devices: Servos, Tamya double gearbox, LED matrix, speakjet
  • Control method: Voice
  • CPU: arduino mega pro
  • Power source: homemade 7.2V NiMH pack
  • Programming language: C++
  • Sensors / input devices: Sharp IR, SRF05 Ultra Sound, EastVR
  • Target environment: indoor
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post