LED Breadboard

Posted on 15/07/2009 by flylit
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

This is my version of the breadboard walkthrough by Jklug80. Thanks for the intructions jklug. Anyway, I decided to add two more LED's and I used 510ohm resistors instead of 330ohm simply because i couln't find 330ohm in my house. I used a breadboard i bought at my local radioshack which cost me $14.99. The LED's I utilized were ones that my dad had laying around. I took the wires out of a telephone cable and connected them to a 9v battery.the double-sided adhesive tape seen was just used to keep ...


LED Breadboard

This is my version of the breadboard walkthrough by Jklug80. Thanks for the intructions jklug. Anyway, I decided to add two more LED's and I used 510ohm resistors instead of 330ohm simply because i couln't find 330ohm in my house. I used a breadboard i bought at my local radioshack which cost me $14.99. The LED's I utilized were ones that my dad had laying around. I took the wires out of a telephone cable and connected them to a 9v battery.the double-sided adhesive tape seen was just used to keep the wires attached so i could take the pictures. I know i have not made anything significant but this is my starting point into the realm of robotics. Hope you like!!

Lights up three LED's

  • Power source: 9v battery
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post