Hexapod Project 1

Posted on 30/01/2011 by roboscience
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

This is a Hexapod Robot ive built from scractch . All parts are laser cut from 6mm acrylic It will be available as a kit form In the verry near future. The project is only a month old at the moment so it will take a little more time to get the kinks worked out .


Hexapod Project 1

This is a Hexapod Robot ive built from scractch . All parts are laser cut from 6mm acrylic It will be available as a kit form In the verry near future. The project is only a month old at the moment so it will take a little more time to get the kinks worked out .

Educational Tool

  • Actuators / output devices: hs645mg servos
  • CPU: Arduino, pololu maestro
  • Power source: Custom 6v 3300mah Nimh Battery
LikedLike this to see more

Spread the word

Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post