Edgar - based on BoeBot

Posted on 08/07/2009 by egres
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

this was my first robot. though it was a kit and i didnt have to create chassis myself, it taught me a lot. after finishing the book and the exercises in it i started to experiment with various sensors different from those in the kit. i wanted to make it for the line following competition. first try was to use photoresistors for following black line on white board, it kinda worked, but was very dependant on ambient light. i then switched to CNY70 (5 of them in row) for line, 2 IR LEDs and 2 PNA4601M ...


Edgar - based on BoeBot

this was my first robot. though it was a kit and i didnt have to create chassis myself, it taught me a lot. after finishing the book and the exercises in it i started to experiment with various sensors different from those in the kit.

i wanted to make it for the line following competition. first try was to use photoresistors for following black line on white board, it kinda worked, but was very dependant on ambient light.

i then switched to CNY70 (5 of them in row) for line, 2 IR LEDs and 2 PNA4601M (from BoeBot kit) one pair fwd and one pair left to enable pass obstacle on track from right.motors, wheelsand other parts are from the kit as well.

i just wanted to put this robot here for record, now i am working on the other one, that i am putting together myself.

two videos i attached: one from competition and the other one just playing with the crawler kit at home.

cost to build is sum of the boebot kit, the crawler kit and all the things i needed - sensors, resistors, capacitors, cables, etc. time to build is rough estimate as well :) including the excersises in the book. otherwise it would be less then 100.

follows line

  • Actuators / output devices: 2 Futaba S148
  • CPU: Basic Stamp 2
  • Power source: 4*AA
  • Programming language: pbasic
  • Sensors / input devices: 5 CNY70, 2 IR LEDs, 2 PNA4601M
  • Target environment: indoor flat surfaces
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post