CrazYshortCircuit micro sumo ( 2 video test )

Posted on 08/11/2012 by staffy
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

Hi allI introduce you my future micro sumo (5X5X5cm) that is being assembled. I is not the tool to my circuit board so I did the welding to the old with a lot of wire to connect the components. The hard part is everything to fit on two miniature circuit without current circuit.  https://www.youtube.com/watch?v=k5G9yOhz3EA https://www.youtube.com/watch?v=dZ3M0foeBxE   Here are the used element:-Picaxe 18 M 2 -L293D -L7805CV +5V -SRF 05 -CNY 70 (X 2) -geared motor solarbotic GM13A -3 ...


CrazYshortCircuit micro sumo ( 2 video test )

Hi all


I introduce you my future micro sumo (5X5X5cm) that is being assembled.


I is not the tool to my circuit board so I did the welding to the old with a lot of wire to connect the components.

The hard part is everything to fit on two miniature circuit without current circuit.

 

https://www.youtube.com/watch?v=k5G9yOhz3EA

https://www.youtube.com/watch?v=dZ3M0foeBxE

 

Here are the used element:


-Picaxe 18 M 2

-L293D

-L7805CV +5V

-SRF 05

-CNY 70 (X 2)
 
-geared motor solarbotic GM13A
 
-3 Led 5 mm green yellow and red
 
-2 x 3.6 V lipo

 

For a weight of 103 grams. It's bad for the competition!

 

 

 

 

 

push other robots out of the ring

  • Actuators / output devices: Gear motors
  • Control method: autonomous
  • CPU: Picaxe 18M2
  • Power source: 7, 7.2 lipo
  • Programming language: Picaxe basic
  • Sensors / input devices: SRF05 Ultra Sound
  • Target environment: on a dohyo(sumo ring)
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post