Buglet - bugbot

Posted on 02/01/2012 by botfin
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

Here's my beetlebot which i call Buglet.I got lots of pics but sorry, they aren't in right angle. First i took parts from my box.Then i went to cut a motor holder from plexiglass.I cutted and bended it to right angle.Then i attached motors and switches and battery holder to it.And next i soldered wires and it is READY!But later i put antennas to switches.


Buglet - bugbot

Here's my beetlebot which i call Buglet.
I got lots of pics but sorry, they aren't in right angle.

First i took parts from my box.
Then i went to cut a motor holder from plexiglass.
I cutted and bended it to right angle.
Then i attached motors and switches and battery holder to it.
And next i soldered wires and it is READY!
But later i put antennas to switches.

Avoid obstacles

  • Actuators / output devices: 2 dc motors
  • Control method: autonomous
  • Power source: 2 AA-cells
  • Sensors / input devices: 2x SPDT switches
  • Target environment: indoor, flat surfaces
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post