BeeBot (ABORTED)

Posted on 26/11/2011 by botfin
Modified on: 13/09/2018
Project
Press to mark as completed
Introduction
This is an automatic import from our previous community platform. Some things can look imperfect.

If you are the original author, please access your User Control Panel and update it.

THIS PROJECT IS CLOSED AND PARTS IN MY BOXES Problem solved: Okay so my problem was that motors didn't get enough power. I tested this with 6v and it worked.   Okay,so here's my third BEAM-robot. But it just don't want to work! I got one picture from very close: Parts i used: - some wires- two 2N3904- two LDRs- two DC motors- AA battery holder But if you know where i have to connect those wires, or what is the problem, tell me please!I add video when this is fixed.I tested all parts and ...


BeeBot (ABORTED)

THIS PROJECT IS CLOSED AND PARTS IN MY BOXES

Problem solved:

Okay so my problem was that motors didn't get enough power. I tested this with 6v and it worked.

 

Okay,so here's my third BEAM-robot.
But it just don't want to work!
I got one picture from very close:

Parts i used:

- some wires
- two 2N3904
- two LDRs
- two DC motors
- AA battery holder 

But if you know where i have to connect those wires, or what is the problem, tell me please!
I add video when this is fixed.
I tested all parts and they work,even transistors!
So wiring is the problem? 

Schematics: (hope you understand these)

Follows light

  • Actuators / output devices: 2 dc motors
  • Control method: Light/autonomous
  • CPU: Analog logic
  • Power source: AA battery
  • Sensors / input devices: 2x LDR
  • Target environment: indoor
Flag this post

Thanks for helping to keep our community civil!


Notify staff privately
It's Spam
This post is an advertisement, or vandalism. It is not useful or relevant to the current topic.

You flagged this as spam. Undo flag.Flag Post