I have bought two stepper motors (RB-Phi-131) because of their high precision and want to use them in a pan/tilt mechanism. I already have the SPT 100 (RB-Sct-130) system and was wondering if there is a good way of connecting the two? I have looked at the Lynxmotion Connection Hub (RB-Lyn-111), however I am concerned that the circular connectors will not work with the stepper motors since the motor has a flat part to its shaft. Any help would be appreciated, thanks.
The two are not compatible at all - you would need to create your own frame. The stepper motor you chose has an 8mm diameter shaft, so this 8mm hub may help.