Nice high amplifying electronic electroscope you built there, Fritsl.
Two ideas:
Mount the electronic electroscope on a robot platform. If your spirit detector detects a “ghost”, the robot plays Ghostbusters (I have the Picaxe tune code if you need :)) and the robot fires its proton gun
I would add between antenna and base of the BC 517 a resistor to avoid the transistor getting fried if the antenna gets in conntact with +6V. I know, unlikley, but Murphy’s law obtains everywhere
Not sure if I’ll be able to sleep well this night after knowing that “they” are so close around us. Or maybe (hopefully!) it’s only a danish phenomenon?
I definitively have to dig deeper into this, looks quite promising. I have a cell phone antenna right across the street not sure if I want to know how my place looks like in the night.
Does it react on your skin too? E.g. when approaching the circuit with your hand?
An apparatus this sensitive will react on most energies. And so of course also aura, which is easily detected. However, I have put it on a stick to avoid false readings of my own aura.
It seams quite hostile, btw? Like “I have detected you, so now I will shoot”? perhaps give them some milk or something instead? it would be easy to make, just have some milk and a bowl ready.
i just love circuits that don’t involve a micro controller , i will build up the circuit and try to fine tune it some more , will tell you where that leads me
I would love to help you, but I am not really sure how I can with the information you are giving me. It’s har to debug your board from here. Best advice as always is: start with the power source, make sure that is working, and then take the next thing, make sure that is working and so on.
I did everything you showed in your circuit but the LED is always glowing and i also want ask you that what should I use for the antenna.If you want to have an idea about my circuit then check out the circuit of talking electronic which I think you have already done so please help me.