I forgot to mention in my last email that the blue light is constantly flashing and does not turn solid even if the reset button is pressed. I do not know if this information is going to change your advice or not, but I thought it would be better to mention it.
Is there anything in particular we need to look for in the contact pins?
In this case, you have mixed up the black and purple wires but we need to see pictures of them so we can confirm which ones will need to be reversed (bonnet or base wires)
Hi
Thank you for your prompt reply. In the meantime time the red light has also started flashing, but not at the same time as the yellow light.
I am confused. Let me know if the photos are good.
The red light blinking comes on as soon as I turn on the robot. Pressing reset does not do anything. The machine is worse since I replaced the pins and the DFI, because before if I pressed the reset button the machine would occasionally work; however, now the red light is constantly blinking. Hence my confusion with the all thing.
It’s possible that the CAT sensor got damaged during the installation of the other parts so please use this video to check it in case something wasn’t connected or out of place:
If it’s the same, then the CAT sensor will need to be replaced.
I have checked the cat sensor and although all the connections looked fine there’s seems to be an issue with the sensor. Because i am unsure whether what i am seeing is normal or not I have taken some photos and made some videos. Hopefully these can show what I mean.
Thank you for your email. The robot is still working fine.The connection of the cat sensor on the main circuit board was loose. As soon as I noticed it and fix it, the problem was sorted.