I’m working on a project to read a scale topobathy model and record changes in sediment and landscape patterns in real time. I have a wave table about 5 ft by 12 ft that will have artificial sediment in it, and we will be running water (no more than a couple inches at a time) ove…

Learning more, I’m wondering about structured light or other non-liDar solutions, since they might not give the resolution/accuracy that I’m looking for. Updated diagram for anyone interested. [0616 Table and sensor setup-01]

I’ve been looking at a set-up very similar to this called Sandworm . Both Sandworm and SARndbox use Kinect sensors, but I have a larger sensor bed in this instance than either set-up and was hoping to find a sensor that would offer a higher resolution. I do have a smaller system t…

Intel’s Realsense solution offered better resolution (and still available even though last we heard that division was shutting down). Range imaging Range imaging is the name for a collection of techniques that are used to produce a 2D image showing the distance to poin…

RobotShop Community

Help with LiDAR Sensor Selection

Help & Support Robot Parts

cbenson June 17, 2022, 3:19pm 4

@AONeill0 Welcome to the RobotShop Community. It seems like what you describe is almost exactly the following (available from a few companies). Are you aware of this?

Ex: This Augmented-Reality Sandbox Turns Dirt Into a UI | WIRED